INTRODUCTION

Fusion Foams

We are one mats manufacturer firm sternly absorbed from the year 1980 with utmost determination towards manufacturing, exporting, and designing fine quality mats, thus marking a huge significance in lives of people.

Closed Cell Foam Structure

Dimensional stability of closed-cell makes the foam material in solid state, so it can play perfectly the product features.

Constr_ico_2

Chemical Cross-Linked & Nontoxic Odor-Free

Plastlist ® PE Foam (Polyethylene Foam) are cross-linked by electron beam(EB)radiation(not chemical crossed-linked, such as DCP).It is an environmental friendly foam from it’s raw material to the manufacturing process.

Constr_ico_3

Abundant Product Features & Applications

Plastlist ® PE Foam (Polyethylene Foam) has high degree of isolation or easing up for water, temperature, sound, odor, radio wave, bacteria and UV light …etc. It is widely applied in general life usages and professional industries.

fusion foams

ABOUT US

KEY POINTS ABOUT COMPANY

The truest wisdom is a resolute determination

History

We are one mats manufacturer firm sternly absorbed from the year 1980 with utmost determination towards manufacturing, exporting, and designing fine quality mats, thus marking a huge significance in lives of people.

Quality

We are staunch believer of maintaining quality thus base material of supreme quality and diverse range is employed for producing world-class mats. Catering everybody’s need is our motto and we live by it.

Plastlist ® PE Foam (Polyethylene Foam) products are cross-linked by electron beam radiation (without any chemical cross-linker, such as DCP).It has obtained Eco Label (the certificate of environmental-friendly product) of categories 1& 2, and meets the European Common Market RoHS requirements. It is produced with clean production processes that emphasizing on the restraints of air, water, waste, toxicant, odor, noise and radiation. It also has high weather-resistance and easy workability that provides the customers with the best quality and performance that effectively reduces the material and production cost.

Characteristics

Low water absorption rate, light weight, weather resistance, soft smooth surface with uniform cell structure for padding.
Foam Expansion Ratio : 1 – 100
Thickness : 1.5 -70mm
Width : 600 -2000mm
Wide process temperature:(-80℃~110℃, even up to 140℃ for a special specification).
Extremely low water absorption or moisture penetration rate.
Good weatherability and chemical resistance. Suitable for thermal or vacuum thermal molding.
Non-toxic, no odor or no volatile organic compounds (VOC).
Comply with European Union (EU) RoHS requirements.
Printable after Pretreatment
Excellent surface quality
High flexural strength
Corrosion-free
Easy to clean

Advantages

Even distribution of air holes : with closed cell, foams are evenly distributed with approximately the same shape and size.
High stability : weather-resistant, low temperature-resistant, and solvent-resistant.
Smooth and appealing surface : The surface of Foam is smooth and appealing that can be applied in various colors; it can be used for exterior surfaces.
Roll supply : The continuous production technique allows for consistent quality. It comes in the roll form such that it is easy for shipment as well as for processing.
Excellent process ability : Foam is light weight. Its high elasticity allows multiple types of processing.
Extremely low water absorption or moisture penetration rate.
Multiple applications : Foam’s integrated and complementary applicability enables the customers extend their product’s to meet new challenges.

EPDM FOAM

It is a synthetic rubber, made from the saturated chain of polyethylene. EPDM foam is a widely-used material across the world and forms the foundations for many products in our day-to-day lives. From the hose pipe used to water our garden to the material used under our house’s roof tiles, EPDM is a
versatile material

EVA FOAM

EVA foam is one class of widely used foam in which EVA stands for ethylene-vinyl acetate. It is a copolymer of Ethylene and vinyl acetate. Eva foam can be used as an effective substitute for many harmful chemical products used in manufacturing process.
It is an apt substitute for natural rubber, vinyl, neoprene, polyurethane

SBR FOAM

It comes from the family of synthetic rubber, made from styrene and butadiene. SBR foam is widely-used material across the world because it offers excellent bounce back effect. SBR foam is majorly used in orthotic devices to provide better cushioning and give pressure relief during pain in areas like limbs or spine.

PE FOAM

PE stands for Polyethylene and has similar polymers of ethylene. It is a common form of plastic and its usage is abundant in our lives. PE foam is a durable, lightweight, resilient, closed-cell material. It is often used for packaging fragile goods due to its excellent vibration dampening and insulation properties.